Rating: - Cool, but bulky!
This is a cool cell phone case. I bought it to replace an worn case - but which I liked because it was not bulky. From the description, I did not know the product had a steel buckle. Take out the steel buckle, and replace it with a leather buckle that you can just slip into the belt as you wear it. The steel buckle is not only too bulky (and therefore protrudes a lot), it can slip off the belt...as it did recently and I dropped the cell phone, almost damaging it. You should design this product to not be dependent on belt width, which the steel buckle does. The design is awesome, but the steel takes away a lot!
Rating: - Does not Fit KRZR phone
I have the KRZR k1m motorola phone, and this case is FAR too large for the phone, which practically engulfs it. there is at least 3/4 of an inch of room between the phone and the top of the case. It is not a "custom fit" at all. The plastic belt loop is impractical as well, large and cumbersome, not sleek or attractive at all. It sets the phone case well away from your body, and seems ungainly. NOT recommended at all.
Rating: - Moto makes great phones and aweful cases.
I'm starting to agree with the guy who said that Motorola makes bad cases so we'll break our phones and buy new ones. I bought this for my KRZR, but didn't like it, because it kept dropping my phone, so I got the vertical version of this case. It broke after about 3 weeks of use, so I went back to this one. The stitching is falling apart, the magnet is weak and doesn't line up, and the case sometimes seems like it was designed for a bigger phone.
The elastic and stitching is almost complete worn out after less then 2 months of use.
When I bought this and the vertical case, there weren't many cases to choose from for the KRZR. I hope that isn't the situation now, as I begin my search again.
Rating: - Laughable - don't do it!
The case really is twice as wide as it should be, so it doesn't hold the phone by friction. The magnet on the clasp is very weak and very difficult to locate in the only location where it will wort of lock, but if you catch it on anything, even brush it, then it's open again. It has a tendency to then sag open and dump your expensive and shiny phone on the ground. I don't know what Motorola is thinking shipping a thing like this. Since there are so few decent solutions for this phone, none that I've found, I'm thinking of stitching velcro to this one to make it work.
- 
- 
-